With the evolving technology, Network Speeds are getting faster day by day. But Some people are still enjoying the 4G’s Blazing speed. Or they don’t want to upgrade, but that’s alright if the 4G network is fast enough to beat 5G! Suddenly the Internet Speed sucks because 4G is Not Showing/LTE is Not Working/Volte is Not Showing. There is a list of the reasons that could be the culprit: Why is LTE/4G/Volte not showing or working?
This article has all the potential reasons why these issues are causing. You can easily follow this guide which may result in Working 4G, LTE, and Volte. However, it has some vital facts that may create these errors on your smartphone.
Let’s do this in Fixing-Mostly’s Way.
To fix the VoLTE or LTE not working, Firstly, Toggle the Airplane mode, then Reselecting the preferred network connection can also be helpful.
Moreover, Enable VoLTE from settings. In the end, If nothing works, reset the network settings to it.
If that’s the scenario, you should try all the steps below.
4 Fixes to Apply in LTE/4G/VoLTE errors
1. Turn On and Off Airplane Mode
Yup! That’s a small task, but if you implement this on your phone, then this could quickly fix LTE or volte not showing.
- Turn On the Airplane Mode and wait until the network stops showing (wait until the network bars switch into the airplane icon).
- Now turn it off after 2-5 Minutes. This might fix this problem.
2. Reselecting Preferred Network Connection
Every smartphone has different bands which control network stability. If your device Initially shows 4G, now it stops showing it. Then the main culprit is the Preferred Network Connection because it changes it whenever there’s a low or poor signal strength of 4G to GSM or WCDMA.
- Open Settings
- Find & Select SIM Card & Mobile Data
- Then Tap on the Default Mobile Data SIM card.
- Here you will see Preferred Network Type > Tap on it.
- Now select 5G/4G/3G/2G to get 4G.
I don’t recommend selecting only 4G because this may cause voice call errors and interrupted calls.
3. Enabling VoLTE From Mobile Settings
In some cases, if you don’t suffer settings properly or carelessly, volte could stop showing.
To enable volte from the settings, follow the given below procedure.
- Open Mobile Settings.
- Now Select SIM Card, and Mobile Data> Select Mobile Data SIM card.
- Here Tap on Enable Volte Calls to make the volte start showing back.
4. At last, Reset Network Settings to Fix All Network Problems
Yes, It works. Resetting these can be beneficial because resetting them will bring the default settings strongly recommended by the company.
So, you can try this; it won’t delete any of your data.
- Open Settings > Additional Settings
- Here Scroll Down & select Backup & reset
- Then Select Reset Network Settings. And reset it.
15 Quick Ways Fix LTE/VoLTE Not Showing On Your Device
Here are some steps to try and fix the issue of LTE/4G/VoLTE not showing on your device:
- Ensure your device is compatible with LTE/4G/VoLTE technology.
- Check if your device’s software is up-to-date and supports LTE/4G/VoLTE.
- Ensure your device is set to a network mode supporting LTE/4G/VoLTE.
- Check if LTE/4G/VoLTE coverage is available in your current location.
- Contact your carrier to ensure your device is activated for LTE/4G/VoLTE service.
- Verify if your SIM card supports LTE/4G/VoLTE.
- Check if your carrier’s network is experiencing any technical difficulties.
- Move to an area with better network signal strength.
- Get your device’s antenna checked for any damage or malfunction.
- Check your device’s settings to ensure LTE/4G/VoLTE is not disabled.
- Contact your carrier to verify if LTE/4G/VoLTE service is available in your area.
- Check if your device has a network lock restricting LTE/4G/VoLTE access.
- Verify if your carrier has suspended or terminated LTE/4G/VoLTE service.
- Make sure your account with the carrier is in good standing.
- Contact your carrier to register your device’s IMEI number for LTE/4G/VoLTE service.
4. Reasons Why VoLTE is Not Showing or Working
If VoLTE (Voice over LTE) is not showing on your phone, there are a few possible reasons:
- Your phone may not be compatible with VoLTE: Not all phones are VoLTE compatible. Check with your phone manufacturer or carrier to see if your phone supports VoLTE.
- Your carrier may not support VoLTE: VoLTE requires carrier support, so if your carrier doesn’t offer VoLTE service in your area or for your specific phone, you won’t be able to use it.
- Your phone may not have the latest software update: Make sure your phone has the latest software update, as some older software versions may not have VoLTE functionality.
- VoLTE may be disabled in your phone’s settings: Check your phone’s settings to see if VoLTE is enabled. Depending on your phone and carrier, you may need to turn on VoLTE in your phone’s settings to use it.
You may be in an area with poor network coverage: VoLTE requires a strong LTE signal to work correctly. If you’re in an area with poor network coverage, VoLTE may not be available.
Try these steps one by one until you identify and fix the issue. If none of the above steps work, you may need to contact your carrier or take your device to a professional technician for further assistance.
This could fix almost all network-related issues. It won’t delete data.
Summing Up all the ways to Fix VoLTE and LTE not working
- Toggle Airplane Mode.
- Reselecting Preferred Network Connection.
- Enabling VoLTE from Settings.
- Restart the device a few times.
- Reinsert the SIM Card.
- At last, Reset Network Settings to Fix All Network Problems
I hope you liked today’s article. It takes lots of time to write an article. So, don’t forget to appreciate it and add a small comment.
That’s it for the article. Today I mentioned Why LTE,4G, and Volte are not showing or working. And I also mentioned some steps to fix it.
